There is A oxy acetylene torch your Piece of equipment which you could have in a shop as you cut and are able to weld with it and this gear would not cost you thousands. You can find a name brand torch with regulators and all attachments for $200 or $300 bucks. The tanks can be rented by you in a welding gas supplier that is fantastic. The tanks will mount at a welding cart that will have a series that will lock upon the tank to prevent them. The cart will have a box at the back so that you can store flashlight, gloves, goggles and all your tips and other items needed. The cart looks like a dolly where you want it, so that you can roll it.
The outfit will have an oxygen and Acetylene tank as you might know by now. The authorities will screw in the tank that is appropriate. The regulator will be colour the oxygen regulator will have green on it and the acetylene will have red on it. One word of warning, do not allow the acetylene tank regulator get 15 psi!!! over Or you may blow the tank up and I do not want to think what you would look like. Acetylene is a gas that is really unstable, so be careful.
Oxygen tanks are extremely dangerous also, you might not believe oxygen is, but under pressure it may ignite so no cutting or welding alongside the tanks and watch out for the hoses which they do not get holes in them or you might have a wonderful fire display.
When combined with oxygen can acetylene Produce a fire? The two gases are mixed by the acetylene welding equipment singapore and in addition, it controls the amount of the cutting or welding fire. The handle will have two knobs for the gases in the lower portion of the torch. They are made from copper-nickel metal brass and stainless steel.